Mark

Town lots of cases = Study... Discovered... Sars was surviving and living in the waste (POO) of humans up to 17 days... they (officials...lol) traced it back to a water treatment plant...they treated the water with water purification tablets and it killed the sars... Pretty simple right... they went even further... not only could it kill the virus...It also could prevent the contraction I mean even if you did catch it your body killed it before it could basically do any damage at all... Whats one thing you see when you hear Covid and lasting effects... that the highest success rates for treatment after contracting the disease the quicker you initiate the treatment the less damage and higher recovery rate... most people didnt make it back off ventilators... If you got treated faster you survived a lot more often ... So, they knew the oxide pills prevented and cured it... Fauci was there he ran that place, dont think he would remember that...?

No way I will get it... Me or my kids...If people want it grab it... But you still require mask, You may Die... You may still infect others anyway... You may still catch Covid... Want to know whats really Stupid... In Fossil Fuels the energy produced has to be 90% efficient or its not considered approved for use. But A Vaccine with a 66% percent success rate (Johnson & Johnson) is going to be manufactured and they are even pressing for FDA emergency approval... why, when almost half the people who get it will still catch Covid, they claim it tames the virus if you do catch it...Your shitting me right... There is one report I saw that mentioned Alum attaching to your cells like in the brain and being damaged... Ill leave it at that - Alzheimers... is the result. When i looked up the ingredients, they looked very clean and simple almost too clean and simple... like there is a lot they arent saying is or could be in there... When I searched for fetal inclusions into the vaccine I found a reference that fetal tissue from some fetus in like 72 or something... was used in the testing by injecting human cells (Fetal) with the virus then studying the results and all... ya know like research...lol But mentioned it was not in the moderna or the Phiser doses... I would like to believe them but at this point I just dont know what to believe and im usually pretty good at this stuff...lol but Im going with... If there is risk with death from getting the vaccine and you still have to wear mask and even if vaccinated you may still contract and also be contagious what to me is the real point other than getting some time off from work and getting something that could kill you when you may not even exhibit any symptoms of the virus at all... Yea Ill pass... I also have seen a lot of articles now about the countries around the world using Hydroxy Chloraquine which I was screaming about last Feb... even showing the CDCs papers from 2007 all you have to do is this... See for yourself... Google these words.... Sars 2005 Outbreak NIH Hydroxy Chloraquine treatment Use the same set up but this time search for Chlorine Oxide... (Water Purification Tablets)...then see the same briefs filed with the National Institute of Health and read their own papers... where they show you... I forget the country lets say India... Nigeria any one its not my point... a town had a high outbreak from SARS... which started with Bats 1000 miles from Wuhan... and actually 152 variations of Sars and Covids... to be precise... So they see this town which is high in breakout, I think im getting this right when you read the NIH papers on the Chlorine Oxide watch for this subject Im at least close enough to get the main focus point across...

Will you get the vaccine?... My Answer = NO... Why...? #BillGates #Vaccine #AirborneVirus #RespiratoryInfection #BehaivourModification #BrainModification #Vmatt2Gene When you SEE and HEAR Bill gates in his own words discussing in 2 0 0 5 with the C I A in a briefing he is holding with a presentation to the C I A... bout Religious fanatics how they are identified in the brain... How he suggested to the guys there infect people with a Flu like Virus... so they could then administer a Vaccine to control and change their behavior through the use of the Vaccine which targets The V Matt 2 Gene which is present in people with religious differences in views (what about Political) While the intent and initial reasoning makes sense... Simply put here was their plan... When you have suicide bombers who strap up with explosives... We could call that group of folks radical- So the idea is, Identify people who disagree with your... Ideology... Infect them with a respiratory Virus/Disease... Under the Guise of Vaccinating them... They inject you to curb change or modify the Gene in the Brain that controls these things... So they are purposely infecting you then injecting you to control your brain and change/Modify your behavior using the vaccine... What about people who we disagree with in politics? Ill attach the link so you can see and Hear Bill gates on April 13th 2004 (did you see that date keep that in mind) way before all this... Stay Tuned... P.S. Im in no way an Anti Vaxer... I am in no way advising you to take or not take the Vaccine that is each persons right and choice... (well for now but not much longer) Since Biden took over... He has written EO after EO... Federal Mask Mandates... CDC is now recommending Mass Transportation also mandate mask. CDC also said schools should already be open... Stuff like this video and all we see around us... People dying taking a vaccine with a 99.7 percent survival rate... All the Draconian Overreach by so Many of the leaders... Double meaning Lock down for YOU doesnt mean I cant still do exactly as I want from so many of those same leaders... Shut downs and closures and Bankruptcies all over the place and they offer up 600 bucks... peanuts in Nancys own words...

Lets see... Dr Baden Claims that Epstein appears to have injuries sustained during a murder not s suicide....lol Im going with Epstein Didnt kill himself says Dr Michael Baden...Ill take his word for it... Jeffrey Epstein's graphic autopsy photos reveal bloodied neck | Daily Mail Online WWW.DAILYMAIL.CO.UK WARNING: GRAPHIC IMAGES - Photos obtained by 60 Minutes and shown publicly for the first time on Sunday, were taken by the New York City medical examiner's office after Epstein killed himself. Ooops those may be a littel graphic...I didnt think they were any big deal but whatever you are warned a little late anyhow...my bad...

So far no explanation for the deposits at all >.... that seems kinda weird... But he was working for the feds we do know that for sure and the article even touches on this known fact... so 3.5 yrs Epstein gets a sweetheart deal sorry for a pun... He walks with 200 cases against him for not prostitution money laundering and rape whatever...Kidnapping if he left the country with them and drugging... Yea great guy... So he ends up pleading guilty to Attempting to Solicited a Prostitute... underage...and gets probation-pretty sure that canary was singing like the mockingbird... more later i gotta crash then drive to GA in the am... 🙂

You can make up your own mind... Lin wood Claims Epstein is alive to Judge John Roberts... Who Lin further implicates in at least two different sexual interactions both young boys around 12 or under... on video by Epstein and even goes as far as lodging formal challenges for Roberts to deny the claims he says he has seen irrefutable evidence of the crimes first hand and there is no doubt at all... He is compromised referring to Roberts, Lin woods exclaims he says ask him why he doesnt deny the accusations if you have questions and doubts...ask the man himself..._yet Crickets... Lin Wood is a Very prominent lawyer for Constitutional law in the State of Georgia, with well over 30 yrs in the legal field a a lawyer and specializes in libel and defamation cases and claims he has nothing to hide or fear and he speaks the truth... Then he says even taunting a bt more to Roberts, wouldnt it be something if Epstein was still Alive... Crickets..... See these and see what you think... The report is simple 14.5 Million moves into a bank account of Epstein 3 months after his death... Ill see if I also can find the picture showing Epstein in person on the Island after he died... ??? For now start with this one.... Like I am Jeffrey Epstein’s mystery bank came alive after his death, receiving millions of dollars from his estate WWW.CHICAGOTRIBUNE.COM After Jeffrey Epstein’s death, his estate transferred more than $12 million to Southern Country bank, according to court documents. https://www.nytimes.com/2020/02/04/business/jeffrey-epstein-estate-bank.html

Then ... Nancy Pelosi’s big Tesla stock buy raises ethics questions AMP.WASHINGTONTIMES.COM A watchdog group has called out House Speaker Nancy Pelosi for a very profitable Tesla stock deal shortly before the Biden administration released plans to make the federal automobile fleet electric.

USA INC. BANKRUPT – NO MORE IRS! WHERE’S POTUS? – THE MARSHALL REPORT THEMARSHALLREPORT.WORDPRESS.COM This is fantastic news. It appears the citizens of the Republic of the United States of America, based on the Constitution and Bill of Rights, is no longer indebted to the service of the Corporation known as The UNITED STATES. And if so, we are no longer indebted to the taxation, any and all financial…

In less than a week after Biden signed a Federal Mask Mandate for all federal buildings and employees... CDC mandates masks on public transportation and affiliated hubs WWW.NBCNEWS.COM The order applies to planes, trains, buses, boats, terminals, train stations, seaports and Uber and Lyft rides.

Unless I see Tanks and mass arrest... I am not buying into any thing currently...

I want the doors the guy gave me permission to copy if I want to... He will only install if I drive the car to cali... I also am eyeing the new center console its for auto or manual... The seats and set up in first picture is awesome I would love it... Anyhow... The Panels for the Tee Tops I made for like 15 bucks when I kept asking if the guy who makes them for newer models would make a few sets he said no...So I made my own shit to keep the sun off me and the heat out... 🙂

For now it will work...

So I started off painting the Bezel Gold instead of the silver they came with... Then I built a wiring harness for them... Then I installed them only problem ... I forgot the blinkers and High beam indicator so I made some... And that was that... 🙂 These are 5" Racing Gauges and the factory are 3 1/3rd something like that...

So then when I got the last engine in a deal with it came along a Painless wiring harness a 10 point cage... the engine transmission but I painted the engine and all new... it only has 20 miles on the engine... anyhow so I got approx 1400 in Gauges and sensors so I figured why not...part of the selling point the fact the guy took a Factory 1977 Bandit Edition then did that to the engine added a 10 point roll cage none of the factory wiring used just went painless with a giant racing flip switch box on the floor and giant hurst shifter the giant gaudy one...I was shit man... He could ruin a wet dream I got the car for the engine and electronics...and put them all to good use...

Oh yea I added Cup Holders Too whod thought... Then I toned the brightness down using some electrical Tape... kinda nice... drink holder...

So These tired Gauges with their old technology wire template... with dark barely usable gauges... yeah its time for the change... So I white Faced them for the cheap 30 bucks or whatever... Helped considerably... Until I tried Red Led lights then it was no better than the black face with a white light... yea they looked cool except the two main center ones that were still bright white... again Fail...

This baby bolts right up to the factory locations and I can remove them and install factory or leave them whatever... 🙂 this is how they look but I hated the cheap cipher seats I got so Swapped them out for some reall racing seats with memory foam and Ill be getting them covered in Camel tan leather later... 🙂 I use them more for the lap seat belt and to be somewhat legal... However any time you modify the factory stuff you break safety laws... A cop may give you a nod or a ticket... I got the bar painted with TA so it matches outside Blue to the tee...

Ok So you can shop used... You can find some shops who redid them and charge you an arm and leg may as well contact a shop and ask how much to recover yours... If your mechanical functions are all there great... If you need to replace things start changing for ya to a degree... First now you need to find out the exact measurements of your set up now... You also need to see if you can remove and reuse anything like is there an angle cage built under your seat or is your seat a unimold kinda thing... only fits your car... I made that word up to get my main point across... Ok So I would remove the front seats and the rears why the hell not... then Search for replacement seats and you can see a great number pop up with adapter kits for cages to mount any seat to to thin shitty ones to Im not driving grand prixx style ones...for two arms and a leg special... Then you get into other things like do you think your going to flip over and go under water? why is that important... Here are a few facts: I could bore you for hours... But to cut to the chase... You have a couple options.. Stay Factory always Legal 100% and factory preserved value... You could also DIE... using Factory over some of the improvements on accident prevention and protection... Or you could Die using one for the wrong reason... All different set ups require different circumstances to provide the proper and correct protection for you... Ill cover a list of some of the most common ways to get protection the right way... Oh and by all means feel free to research and discover what you want to believe and do, its all up to you and in your hands... 1) Factory seat Belts and options... So you decided to stay factory... thats fine its a weekend rider thing classic and your cruising hell a lap belt is probably more than you would ever need then your fine this car is good for you and other than some freak accident you should be perfectly fine with the factory installed equipment... Make sure its all in good service condition and not frayed or showing signs of wear that would make it possible to fail rather than protecting you... the aut lock feature works on shoulder strap yada yada yada... 2) Harness seats and Bars.... This one we see done a lot and its fine as long as you understand the mechanics of an accident... (You do remember the crash test Dummies and all the commercials we see of smashing a car head on into another vehicle...) Well all that data is why we know what we do and continue to make improvements moving forward... Ask Dale Earnhart So The biggest part to understand is bto too tricky at all as your body is flipping over inside with the vehicle your in your head and neck are angled the opposite direction... so if your car is about to flip over to the right your head is actually behind you a bit to the left so if the car were to land on its roof your head isnt directly under it where the main impact would be...its to the left of that spot... If you were secured in a racing seat Four five or six point harness then your head would be in that exact same place as not the brint of the force of the flipping car is now going to land... But just before it does you have a split second that you realize your about to roll over and the roof is going to take the direct blow...to wonder... Did I built the roll bar strong enough... if you did you dont end up with a broken neck... If you didnt then you may die or worse survive and a vegetable... What the number 1 mistake people who install racing seats with four way and five way harnesses they make your body so rigid and centered in a fixed position that unless you have re enforced steel cage around you your odds of getting injured or killed are actually increased...over if you simply left factory alone... Now... With that said... its up to you the decision is all yours to define and make and follow through with... also a simple bolt in cage with bolts and screws isnt the same I dont care what anybody tells you... Ask them for crush proof evidence and see what they say... Can it be done sure... do they come like that now...NOPE... Now here are a few other things to consider... Submarine is to squish down in the seat by the force of the safety belt to a degree which it can cause a spinal injury...this usually is a result of 4 way harness that will permit your body to semi fold as it slides down towards the floor without restraint... a 5 way harness has a strap up in between your legs that prevents this from occurring.... its also the type of impact that this can happen with... that matters... where you could basically come out of the harness vie where your legs are at .... Also do some research in the type of quick release your buying some have been known to fail...in race cars for example there are a couple of brands that if your inverted upside down they dont release with dead weight on them with that force... So if you thought you may end up inverted upside down and in a lake would you be concerned? Things like those make a difference...now we all know if your riding in a jeep in racing four way harness seats and you dont have a cage bar directly over your head you are taking a risk where a normal seat belt may save your life over a pro seat that puts your head right in the path... I opted for 4 way seat harnesses for my Trans Am I have not opted for them in my jeep... I figure in my jeep the odds of me landing on the roof are greatly increased over the TA... I also bought race quip harnesses and rear race cars run the same gear. the rest Ill show ya know...for my particular set up I designed a different Harness bar and set of connections for the following reasons... My seat belts were shit frayed old faded and looked like shit... I decided I was getting new seats harness bar and belts...but not a cage... I also figure I will ride slightly loosened but not where I can come out or anything... Just not where I cant reach the dash like the first times when you harness up...lol So Here we go factory seat belts... Hell you can see a fray tear there now... you also can see the crease over time basically they arent safe...Im not stopping the run to the store until new ones come in but im hoping and planning my life doesnt depend on it either... So now the harness bar... So I paid like 152 for it somewhere. and everywhere I saw them mounted was on the back floorboard with the strap through the seat then straight down and I thought of submarine stuff. and I keep looking up thinking why not where my regular seat belts go... but how? Plus I dont loose the use of the back seat and it also adds some strength to the T top section which I did pop one in the past for twisting up and the body went a little too far also...

Lets start with Carpet... So I did... Then I said man these seat suck and are broken... So I decided to fix that problem...

So anyhow think about how you want the end result to look and then get it done... 🙂

Dont get confused yet.... Those above are just the filler and blending this last set of two are the ones I trimmed and painted in then you see...

Then you notice down here at the bottom the mirrors look cut in and filled a lot better... also I trimmed the mirrors in painters tape all along the edge line and then I painted Jet Gloss black... all over the transition from hood to seal to part... shaker whatever...cross brace... then when I peeled the painters tape this left me with a preitine edge and all on the actual reflective surface of the mirrors by using the glas the lines are crisper and cleaner and the tape removal went like a snap...

So here are a couple of tricks for the mirror hood installation... You can locate them Ill grab links in a minute for yall So you get your box and your ready... Wash your shit before you even start... And then clean it some more... Then when your ready you can wipe it and would eat peanut butter from that spot... grab the kit only instead of using the brown Liquid nails the guy sells in the kit... Grab some real Marine Grade Adhesive chalk and look at each mirror and exactly how its gonna fit...I would suggest taping them up in position all at least once to make sure they all look and fit proper... Now keeping this in mind... remember the reflectors are like a thick plexiglass with a bit of flex but so is distortion...in the bend...so the idea is to get them as flat and clean installed as possible this means you may have some gaps and voids and you also may not be professional at everything Like I am so if your not at installing Chalking and making really nice smooth lines and working with the shit... Then I suggesting paying attention...lol hehehehe Just seeing whos reading really... So anyhow kinda keep this in mind... I went ahead not knowing and used the shitty Liquid nails... and it drips brown poo look and its really messy and well it basically sucked... Before i did too much damage I ran and grabbed some really heavy duty Black marine grade silicone Sealant... and went at it... Then after I got it all secured and looking in the best location I later went back and filled in underneath where the gaps and voids were so I could get a nice shiny and smooth blend in I also added the Shaker to the hood Just sick of messing with it... Well hell I found these pics and I can explain...LOL So since the 79 and 77 shaker are different as you can see the 77 sat thinner and lower but since it will be mounted to the hood anyway a sleeker look to me will be nice also the engine still fits the hood the same... The air filter now a full air flow draws from all sides including the top itself... So I switched shakers painted it then decided I didnt like the gold and the clear coats keep messing up the paint would look cracked so I said screw it went black and mounted it with electronics for the installed shaker back light then sealed it to the hood... if you notice you see the brown liquid nails and a void gap like I was attenmpting to explain... first pic below here...